DINOSAUR ELECTRIC IGNITION CONTROL BOARD ATWOOD, UIB-64
$
Part number: 02-3957
Dinosaur Electric 02-3957
Ignition Control Circuit Board; For Atwood ® AC/Gas Water Heaters That Have Both 4 Position And 6 Position Edge Style/ 10 Pin Style Connector; Can Also Be Use In Older Furnaces/ Water Heaters And Refrigerators That Use A Standard Igniter Board With A 6 position Edge Or Pin Style Connector By Configuring Jumpers On The Board; 12 Volt DC.
Attributes
Compatibility: Atwood ® AC/Gas Water Heaters That Have Both 4 And 6 Position Edge Style/ 10 Pin Style Connector
Voltage: 12 Volt
Length (IN): 4-1/4 Inch
Width (IN): 3-1/4 Inch.
Attributes
Compatibility: Atwood ® AC/Gas Water Heaters That Have Both 4 And 6 Position Edge Style/ 10 Pin Style Connector
Voltage: 12 Volt
Length (IN): 4-1/4 Inch
Width (IN): 3-1/4 Inch
Product Description
Universal ignitor board specialized to work in Atwood’s® AC/Gas water heaters with 4 + 6 header pin or edge style connectors, or with the single 10 pin connector used in Atwood's® latest models. By resetting the jumpers it can function like a UIB S ignitor board so it can be configured to replace standard DSI ignitor boards that use a single 6 position connector found in older water heaters, refrigerators and furnaces.
Features & Benefits
TEI Certified
12 Volt DC Operation
Jumper Configurable For Universal Applications
Fuse And Surge Protected
3 Diagnostic LEDs
By Resetting The Jumpers It Can Function Like A UIB S Ignitor Board So It Can Be Configured To Replace Standard DSI Ignitor Boards That Use A Single 6 Position Connector.
